Horizon Fitness RST 5.6 Service Manual page 16

• If the treadmill has a Demo Mode then Eng3 will also have the following:
(T73, T74, 2.3T, 3.3T, 5.3T T4, T6, LS925T, RCT7.6, 30519, 620T, 720T, 730T, 820T, 830T, 930T)
o The Brickyard will scroll "DEMO ON" or "DEMO OFF".
o The default will be "DEMO ON".
o The +/- buttons will change between the Demo On and Demo Off settings.
o The mile/ km will continue to function as normal.
Eng4 (Information)
• The information portion of the display will show "Eng4"
• The matrix will scroll "INFORMATION"
• Once entered, the display will scroll "ACCUMULATED TIME"
o "F00" will appear in the information portion of the display along with the accumulated time
• Speed or Incline +/- will switch between the accumulated time and distance
• When changed , the display will scroll "ACCUMULATED DISTANCE"
o "F01" will appear in the information portion of the display along with the accumulated distance in miles or km de-
pending upon current setting
Note 1: There should be no Manual Calibration. This function is not needed
Note 2: There should be no Roller Diameter Value set up. This should be done internal to the software. If there are multiple
models included in one software package, the program should automatically adjust the roller diameter value. There is no need
for the user to change.
16 | rst 5.6 & rct 7.6 service manual 2007_rev1.0
R S T5. 6 & R CT 7 . 6 S e a r s S e r v i c e M a n u a l 2 0 0 7
E n g in e e r in g M o d e C o n t i n u e d