Menu Control System - T+A DD 820 M User Manual

The DD 820 M features a 'Main Menu' which enables
you to control rarely needed supplementary functions,
and a 'Configuration Menu' which enables you to carry
out the basic set-up and configuration processes for the
device.
In most cases the 'Configuration Menu' is only required
the first time the system is used, although it is also
needed if you make a fundamental change to the
system.
All the menus are displayed page by page on the screen
of the TV set connected to the system. The individual
menu point you select is also displayed on the
PT 820 M's integral screen. This ensures that you can
also operate the menus without the TV set being
switched on.

Menu control system

The menu system is operated by using the remote
control buttons 
 . 
 
 
 
 
 
 
 
Note:
40
   ,    ,  
Brief press:
opens and closes the Main Menu.
Hold pressed in for about 3 seconds:
opens the Configuration Menu.
   
Selects a menu point.
   
   
Changes the setting of the currently
selected menu point.
   
Activates the currently selected function.
Closes the menu.
If you are using the F1 system remote
control handset note that the
rocker can also be used instead of the
   
button.
 ,     ,     ,     and  
 
 