Print Speed Is Slow; Partial Document Or Photo Prints; Photo Smudges Or Scratches - Lexmark X4850 - AIO INKJETPR P/C/S 27/30PPM WLS B/G/N User Manual

4
Choose an orientation.
5
Click OK.
Make sure paper size matches the printer setting
1
From the software application, click File
2
From the "Format for" pop-up menu, choose 4800 Series.
3
From the Paper Size pop-up menu, check the paper size.
Clean print cartridge nozzles
For more information, see "Cleaning the print cartridge nozzles" on page 98.

Print speed is slow

These are possible solutions. Try one or more of the following:
Maximize computer processing speed
•
Close all applications not in use.
•
Try minimizing the number and size of graphics and images in the document.
•
Remove as many unused fonts as possible from your system.
Add memory to your computer
Consider purchasing more RAM.
Select a lower print quality
1
From the software application, click File
2
From the third pop-up menu from the top, choose Quality & Media.
3
From the Print Quality menu, select Normal.
Remove and reinstall the software
It is sometimes helpful to remove the existing printer software and reinstall it. For more information, see "Removing
and reinstalling the software" on page 148.

Partial document or photo prints

These are possible causes and solutions. Try one or more of the following:
Check document placement
Make sure the document or photo is loaded facedown on the scanner glass in the lower right corner.
Check paper size
Make sure the paper size being used matches the size you selected.

Photo smudges or scratches

To prevent photo smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
Page Setup.
Print.
Troubleshooting
125