Starting And Exiting Captureontouch - Canon imageFormula DR-C225 User Manual

Starting and Exiting CaptureOnTouch

###HOME > Chapter 6 Scanning with CaptureOnTouch > Starting and
Exiting CaptureOnTouch###
By default, CaptureOnTouch becomes resident in the system when
you start your computer.
Double-click (CaptureOnTouch icon) in the taskbar to start
CaptureOnTouch and display the main window.
You can also start CaptureOnTouch from the Start menu. Click
[Start] - [All Programs] - [Canon DR-C225] - [DR-C225
CaptureOnTouch].
The interval between the time you press the Start button on the
scanner and the time scanning begins is shortened when the
[Make CaptureOnTouch resident] check box is selected in the
[Basic settings] tab of the [Environmental settings] dialog box.
For details, see "Environmental Settings" on p.57.
Click (CaptureOnTouch icon) in the menu bar and then click [Launch
CaptureOnTouch] from the menu which appears to start CaptureOnTouch
and display the main window.
The interval between the time you press the Start button on the
scanner and the time scanning begins is shortened when the
[Make CaptureOnTouch resident] check box is selected in the
[Basic settings] tab of the [Environmental settings] dialog box.
For details, see "Environmental Settings" on p.57.
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click
This closes the window, but CaptureOnTouch will continue to reside in the
system.
To quit the CaptureOnTouch application, click
in the taskbar, and select [Exit] from the menu.
CaptureOnTouch becomes no longer resident in the system and the icon
disappears from the taskbar.
39
at the top of the window.
(CaptureOnTouch icon)