Starting And Exiting Captureontouch - Canon imageFORMULA DR-F120 User Manual

Standard Scanning
Click the Select document and Output panels, and then click the
[Scan] button to scan the document. You can select the scan
method according to the document type and purpose of use before
scanning.
-> "Standard Scanning"
Scanning Shortcut
You can register in advance combinations of frequently-used
document selections and output methods as a "Scanning Shortcut".
Just click the Scanning shortcut panel to implement the scan.
-> "Scanning Shortcut"
Start button
"Scanning shortcuts" are allocated to the scanner start button in
advance. Set the document and press the Start button to start the
scan. You can also allocate your own shortcuts to the start button.
-> "Scanning with Start Button"

Starting and Exiting CaptureOnTouch

By default, CaptureOnTouch becomes resident in the system when
you start your computer.
Double-click (CaptureOnTouch icon) in the taskbar to start
CaptureOnTouch and display the main window.
 You can also start CaptureOnTouch from the Start menu. Click
[Start] - [All Programs] - [Canon DR-xxx] - [DR-xxx CaptureOn-
Touch].
 The interval between the time you press the Start button on the
scanner and the time scanning begins is shortened when the
[Make CaptureOnTouch resident] check box is selected in the
[Basic settings] tab of the [Environmental settings] dialog box.
For details, see "Environmental Settings" on p.45.
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click
window. This closes the window, but CaptureOnTouch will continue
to reside in the system.
To quit the CaptureOnTouch application, click
icon) in the taskbar, and select [Exit] from the menu.
CaptureOnTouch becomes no longer resident in the system and the
icon disappears from the taskbar.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the
system, use one of the following procedures to restart it.
29
at the top of the
(CaptureOnTouch