Saving Settings - Lexmark 4600 Series User Manual

From here
Device Setup
Network Setup
Note: Your printer model may not have
wireless capability and may not have this
option.
Defaults
After selecting an option, press

Saving settings

You can set the default paper size, paper type, and photo print size for the documents and photos that you print.
Note: These default settings apply only to print, copy, and scan jobs that you initiate from the printer.
1
From the printer control panel, press
2
Press the arrow buttons until Defaults appears, and then press
Paper Size appears on the display.
3
Press again.
4
Press the arrow buttons to select the default paper size for the printer, and then press
5
Press the arrow buttons until Paper Type appears, and then press
6
Press the arrow buttons to select the default paper type for the printer, and then press
7
Press the arrow buttons until Photo Print Size appears, and then press
You can
Select:
•
Language to change the language setting.
•
Country to set the default blank paper size and date format being
used in your location.
•
Power Saver to set the time that it takes for the printer to switch
to Power Saver mode when left idle.
•
Clear Settings Timeout to change the time that it takes for the
printer to reset the menus to factory default settings when the
printer is left idle.
Select:
•
Print Setup Page to print a page that lists the network settings.
•
Wireless Information to view the network name and the signal
strength of the wirelss network.
•
TCP/IP to view the IP address, IP Netmask, and IP Gateway of the
printer.
•
File Print to choose whether a network computer is selected
automatically or manually during File Print jobs.
•
Reset Network Adapter Defaults to reset the wireless network
settings.
Select:
•
Paper Size to choose a paper size.
•
Paper Type to choose a paper type.
•
Photo Print Size to choose the size of photo(s) to print.
•
Set Defaults to choose to use the current default settings or the
factory default settings.
to save your selection. Press
.
28
until you exit Setup, or press another mode button.
.
.
.
.
.