Changing Temporary Settings Into New Default Settings - Lexmark 4600 Series User Manual

8
Press the arrow buttons to select the default photo print size for the printer, and then press
9
Press until you exit Setup, or press another mode button.

Changing temporary settings into new default settings

The printer has default temporary settings for the menus. The printer reverts to these default temporary settings
after two minutes of inactivity or after the printer is turned off:
Temporary settings
Copy menu
Scan menu
Photo menu
To change the temporary settings into new default settings
1
From the printer control panel, press
2
Press the arrow buttons until Defaults appears, and then press
3
Press the arrow buttons until Set Defaults appears, and then press
Use Current appears on the display.
4
Press again.
5
Press until you exit Setup, or press another mode button.
To disable the settings timeout feature
You can disable the settings timeout feature if you do not want the printer to revert to the default temporary settings
after two minutes of inactivity or after turning off the printer.
1
From the printer control panel, press
2
Press the arrow buttons until Device Setup appears, and then press
•
Copies
•
Resize
•
Lighter/Darker
•
Quality
•
Copies per Sheet
•
Pages per Sheet
•
Original Size
•
Content Type
•
Quality
•
Original Size
The following Photo options will not time out after two minutes of inactivity or after
turning off the power but will return to the default factory settings when a memory
card or flash drive is removed.
•
Lighter/Darker
•
Photo Effects
•
Photo Size
•
Layout
•
Quality
.
.
.
.
.
29
.