pyrexx PX-1C Operating Manual page 67

Alarm forwarding has not yet
taken place
If the alarm forwarding has not yet taken
place, you can stop the alarm directly on
the alarm-triggering device:
f Press the testing / stop button on
the device triggering the alarm
5 Alarm is stopped and is not forwarded
Alarm forwarding has already
taken place
If the alarm forwarding has already taken
place in a radio group, and you can iden-
tify the alarm-triggering device, proceed
as follows:
f Press the testing / stop button on
the device triggering the alarm
5 Alarm on the triggering device and
forwarding devices is stopped
EN EN
Operating Manual: PX-1C - Smoke Alarm Device with Radio Link
If the alarm forwarding has already taken
place in a radio group, and you cannot
identify the alarm-triggering device, pro-
ceed as follows:
(1) Press the testing / stop button on
a device of a subgroup or shared
radio group
(2) Alarm of the forwarding devices of
this group is stopped
(3) Follow the same procedure for
other groups
The alarm of the alarm-triggering
device can only be terminated
directly on the device in question.
Thus the fire location can be
located in case of fire.
(4) Press the testing / stop button on
the device triggering the alarm
5 Alarm on the triggering device and
forwarding devices is stopped
67