pyrexx PX-1C Operating Manual page 61

Note the following when setting up the
master device of a radio group:
(1) Push the splint pin sideways off of
activation button
(2) Push activation button flush
5 No other device is in learning mode
(3) Press and hold the radio button with
splint pin until:
(4) Release radio button
5 Device max. 10 minutes in
learning mode
EN EN
short acoustic signal
Operating Manual: PX-1C - Smoke Alarm Device with Radio Link
6.2 Expand radio group
(learning mode)
Observe the following when putting addi-
tional devices into operation and expand-
ing the radio group:
(1) Push the splint pin sideways off of
activation button
(2) Push activation button flush
short acoustic signal
5 Device max. 10 minutes in
learning mode
(3) Add more devices analogous to the
radio group
5 With each additional device, the
learning mode for all devices is
extended by 10 minutes
61