IBM 9077 Get Connected page 108

Type or select values in entry fields.
Press Enter AFTER making all desired changes.
Administrative Hostname
SNMP Community Name
Extension Node Identifier
SNMP Agent Hostname
Reconfigure the extension node?
* Node Number
Note: The Extension Node Identifier (the number of the slot in the GRF,
the SP Switch Router Adapter card is seated) must be given as a two-digit
number, so slots 0-9 must be entered as 00-09!
Command: OK
Before command completion, additional instructions may appear below.
The endefnode command has completed successfully.
• Command:
smitty enter_extadapter
Enter Extension Node Adapter Information
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
Network Address
Network Netmask
Reconfigure the extension node?
* Node Number
Enter Extension Node Information
[grf16.msc.itso.ibm.com]
[spenmgmt]
[03]
[grf16.msc.itso.ibm.com]
no
[4]
COMMAND STATUS
stdout: yes stderr: no
[Entry Fields]
+
#
[Entry Fields]
[192.168.14.4]
[255.255.255.0]
no
[4]
Installation and Configuration
+
#
90