Using The Control Bar - Epson PowerLite 1705c User Manual

note
The AirPort network name
may be different than the
AirPort base station name.
To check the network name,
start the AirPort Admin
utility, select your base
station, and click
. Then click
Configure
. The
Show All Settings
network name appears on
the AirPort tab.
Presenting Through a Wireless Network
76
Downloaded From projector-manual.com Epson Manuals
2. Make sure you're trying to connect to the right network. In
Windows, verify that you've enabled your computer's connection
to the access point or that your wireless card or adapter is enabled,
and that its SSID matches the projector's ESSID. In Mac OS X,
check the AirPort status menu (click the AirPort icon on your
menu bar) to make sure AirPort is turned on and the projector's
ESSID or your AirPort network is selected.
3. Make sure you aren't projecting one of the EasyMP configuration
screens. (You should see a message that the projector is ready to
connect.) If you have to exit a configuration screen, restart NS
Connection.
4. Make sure the ESSID for your projector matches the SSID for
your wireless card, adapter, or access point. If you have an AirPort
base station, make sure the projector's ESSID matches the AirPort
network name. Remember that the ESSID is case-sensitive.
5. Check the IP address for both your projector and your wireless
card, adapter, access point, or AirPort base station. The first three
segments of the IP address should be identical. The last segment
of the projector's IP address should be close, but not identical, to
the last segment of the IP address for your wireless interface,
access point, or base station.
6. Restart your computer and start NS Connection again.
7. If you still don't see your projector, follow the instructions in
"Connecting in Advanced Connection Mode" on page 77 to
connect to the projector.

Using the Control Bar

From the control bar, you can access these NS Connection features:
Displays the Select target projector dialog box.
Stops projection of computer images while connecting to the
projector.
The projector projects the computer image.
Pauses projection of computer images. Click again to restart
projection.