Epson PowerLite 1705c User Manual page 59

7. When you're done making these settings, highlight the
button at the top of the screen, then press
Complete
save your settings and return to the main EasyMP screen.
Now you're ready to set up your computer for wireless projecting. Go
to "Configuring the Network Settings for Windows" below, or go to
"Setting Up Your Mac for Access Point Mode" on page 65. If you
want to enable security options for your network, see page 67 to set up
the option that your network uses on the projector.
Configuring the Network Settings for Windows
Before connecting to the projector, you need to make sure the settings
for your computer's wireless card or adapter match the settings you
entered for the projector.
1. Access your wireless network Properties window. For example, in
Windows XP you would click
and Internet Connections
Connections
Downloaded From projector-manual.com Epson Manuals
and press , then choose
Enter
Start > Control Panel > Network
. Then click the
icon. You see a screen similar to this:
Right-click and select
Properties
Return
. Choose
Enter Setup
and press to
Yes Enter
Network
Presenting Through a Wireless Network
note
On some Windows systems,
you can right-click
or
My Network Places
Network Neighborhood
on the desktop and select
.
Properties
Settings may vary,
depending on your wireless
network adapter. See the
documentation for your
adapter for more
information.
59