Epson PowerLite 1705c User Manual page 74

note
If a projector is in use and is
"locked," you won't be able
to select it.
To lock the projector from
connection by other users
while you are connected,
click the
Disable interrupt
checkbox.
connection
De-select it to disable the
lock and allow connection
by other users.
If PowerPoint is already
running when you start the
projection and you see a
message that says you need to
restart PowerPoint, close
and reopen PowerPoint
after starting NS
Connection.
Presenting Through a Wireless Network
74
Downloaded From projector-manual.com Epson Manuals
You see the screen below. (If you have previously started NS
Connection, this may be the first screen you see.)
If the connection is working properly, you see your projector
listed. If you have additional Epson projectors on the network,
they are also listed, along with their status.
The status is indicated next to each projector's name.
5. Once the name of your projector appears, select it and click
. If more than one projector is listed, you can select
Connect
additional ones and connect to them (up to four) at the same
time.
If the selected projector is already being used by another person,
you can still connect to it (unless it is "locked"); doing so
automatically disconnects the other user. If a projector is locked,
you won't be able to connect to it when it is in use.
If you don't see the projector, follow the suggestions on page 75.
Select projector