Download Print this page
   

Advertisement

(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf
(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf)
(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf
TURN ON YOUR EQUIPMENT
1. Connect the power cord to the back of the
Connect the power cord to the back of the
projector and plug the other end into an
projector and plug the other end into an
electrical outlet.
2. Open the A/V Mute slide. Make sure the
Open the A/V Mute slide. Make sure the
slide is opened completely.
3. To turn the projector on, press the
To turn the projector on, press the
Power button on the projector or the
Power button on the projector or the
remote control. The projector beep
trol. The projector beeps once,
and the projector's Power light flashes
and the projector's Power light flashes
green and then stays on.
CAUTION: Before unplugging the
CAUTION: Before unplugging the
projector...
Shut down the projector properly:
Shut down the projector properly:
1. Press the
2. When the orange light stops flashing
When the orange light stops flashing
and the projector beeps, you can unplug
and the projector beeps, you can unplug
the projector.
Epson PowerLite 1705c Quick Start Guide
Epson PowerLite 1705c Quick Start Guide
Power button twice.
tton twice.
ADJUST THE IMAGE
1. To raise the image, press the blue foot
release button for the front adjustable foot
release button for th
and lift the front. Release the button to
lock the foot in position.
lock the foot in position.
2. Turn the focus ring to sharpen the image.
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the
Turn the zoom ring to reduce or enlarge the
image.
3. If your image looks like
If your image looks like
move the projector so that it is directly in
move the projector so that it is directly in
front of the screen, facing the screen
front of the screen, facing the screen
squarely.
4. If your image looks like
If your image looks like
pres the
projector to correct it.
projector to correct it.
press the blue foot
Release the button to
or
or
or
buttons on the

Advertisement

   Related Manuals for Epson PowerLite 1705c

   Summary of Contents for Epson PowerLite 1705c

  • Page 1

    Epson PowerLite 1705c Quick Start Guide Epson PowerLite 1705c Quick Start Guide (adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf (adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf (adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf) TURN ON YOUR EQUIPMENT ADJUST THE IMAGE 1. Connect the power cord to the back of the Connect the power cord to the back of the 1.

  • Page 2

    CHOOSE A PRESENTATION METHOD “Tethered” (recommended when viewing video) 1. Make sure you’ve turned on the projector and adjusted the image as described earlier. 2. Locate the computer cable that came with the projector. Connect one end to the projector’s blue Computer (Component Video) port.

  • Page 3

    “Wireless” NOTES: 4. If you see this screen, If you see this screen, click Yes. Make sure the wireless module and the Easy MP (EMP Make sure the wireless module and the Easy MP (EMP NS Connection) software has been installed and that the NS Connection) software has been installed and that the projector is configured for our network.

Comments to this Manuals

Symbols: 0
Latest comments: