Using Access Point Mode - Epson PowerLite 1705c User Manual

Using Access Point Mode

To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1. Press the
2. Choose
You see this screen:
3. Make sure
not, use the
Advanced
4. If your network is using 802.11a, use the
the remote control to highlight
select it.
5. To enable your computer to find the projector on the network,
you need to enter an ESSID, which is the SSID name of your
access point or the name of your AirPort network. (The name of
Downloaded From projector-manual.com Epson Manuals
button, then choose
Menu
and press
Wireless LAN
is selected for the Connection mode. If
Advanced
pointer button on the remote control to highlight
, then press to select it.
Enter
and press
Network
.
Enter
pointer button on
, then press
802.11a Enter
Presenting Through a Wireless Network
.
Enter
to
57