Checking Projector Status; What To Do When The Lights Flash - Epson PowerLite 1705c User Manual

Checking Projector Status

If your projector isn't working correctly, first turn it off, wait for it to
cool (the
Power
plug the power cord back in and turn on the projector. If this doesn't
solve the problem, check the lights on top of the projector.

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status.
Power light
Refer to the following table for a complete description of the
projector's status lights:
Status lights
Light Status
Orange
Flashing green
Green
Flashing orange
Red
Downloaded From projector-manual.com Epson Manuals
light stops flashing orange), and unplug it. Then
Description
The projector is in sleep or standby mode. You can unplug it or press the
P Power button to turn it on.
The projector is warming up. Wait for the image to appear.
The projector is operating normally.
The projector is cooling down. You can't turn it back on (and you should
not unplug it) until the light stops flashing and remains orange.
There is a problem with the projector. Check the other two lights and the
information on page 156 to diagnose the problem.
Temperature
light
Lamp light
Solving Problems
155