CipherLab 8600 Reference Manual page 90

8600 Series Mobile Computer
The antenna icon, with gray bars, flashes
to indicate 8600 is connecting to an access
point under the same SSID.
Once connected, the antenna icon will stop
flashing. Next to the icon, the more white
bars, the stronger the signal.
Note: If you are programming in C or BASIC, be aware that the antenna icon will appear
on the device screen after NetInit() or START TCPIP() is called. (WPA must be
enabled first!)
78
Reference Manual
The flashing icon
processing a pre-share key.
Wait for a few seconds.
indicates 8600 is