Kernel Update - CipherLab 8600 Reference Manual

8600 Series Mobile Computer

4.2.2 KERNEL UPDATE

The kernel and bootloader might need to be updated to improve performance or due to
other considerations. Refer to
The procedure of downloading a kernel (K8600.shx) or bootloader (BL8600.shx)
update is like downloading a program.
Any attempt to download an older version of bootloader will be rejected.
The system will restart itself right after downloading.
Warning: Do not turn off the mobile computer while downloading a kernel update or
re-starting the mobile computer. Otherwise, it will crash the kernel forever.
Note: The mobile computer will stay in download mode for approximately 30 seconds.
.SHX Program
Firmware File
SETTINGS
Interface
Options
RS-232
USB VCOM
Bluetooth
SD Card
USB VCOM_CDC
Fast VPort
90
Reference Manual
Appendix I Download
Download one of the following firmware files:
Kernel update:
Bootloader update:
Description
Proceed to configure baud rate settings on your computer and the
mobile computer.
Connect the USB cable between your computer and the mobile
computer.
Approach the target Bluetooth enabled device.
This option is available only when the memory card is present.
This option is available only when USB Virtual COM_CDC is in use.
This option is available when the Fast VPort cable is connected.
Utility.
K8600.shx
BL8600.shx