Routing The Tubing - Panasonic U-8ME1E8 Installation Instructions Manual

3-3. Routing the Tubing

● The tubing can be routed out either from the front or from the bottom. (Fig. 3-5-a)
● The connecting valve is contained inside the unit. Therefore, remove the front panel. (Fig. 3-5-b)
(1) If the tubing is routed out from the front, punch out the slit part (
● Be careful not to damage the tubing cover.
(2) If the tubing is routed out from the bottom, use cutting pliers or a similar tool to cut out the tubing outlet slit (part indicated by
from the tubing cover. (Figs. 3-5-c and 3-6-b)
● Be careful not to damage the tubing cover.
Model : 8 hp, 10 hp, 12 hp Model : 0706, 0906, 1156
Front
Bottom
Model : 8 hp, 10 hp, 12 hp
Remove eight panel
screws from front panel.
Tubing cover
Fig. 3-5-c
Model : 14 hp, 16 hp
Front
Bottom
Model : 14 hp, 16 hp
Remove eight panel
screws from front panel.
Remove three screws
). (Fig. 3-6-a)
Fig. 3-5-a
Fig. 3-5-b
If the tubing is routed out from the front,
punch out in the direction of the arrow.
Fig. 3-6-a
If the tubing is routed out from the bottom,
use cutting pliers or a similar tool to cut out
the tubing outlet slit from the tubing cover.
Fig. 3-6-b
Fig. 3-6-b
23
Model : 18 hp, 20 hp
Front
Bottom
Model : 18 hp, 20 hp
Remove eight panel
screws from front panel.
Tubing cover
Tubing cover
)