Page 1
Urban Multi air conditioner Bedienungsanleitung Deutsch Urban Multi Klimaanlage Manuel d'utilisation Français Unités extérieures Urban Multi Gebruiksaanwijzing Nederlands Urban Multi airconditioner Manual de operación U-5MX4XPQ Español Acondicionador de aire Urban Multi U-8MX4XPQ U-10MX4XPQ Manuale d'uso U-12MX4XPQ Italiano Climatizzatore Urban Multi U-14MX4XPQ U-16MX4XPQ ∂Á¯ÂÈÚ›‰ÈÔ...
Be sure to use only accessories if needed. made by Panasonic which are specifically designed for use with Also, if this equipment is transferred to a new user, make sure to the equipment and have them installed by a professional.
Do not operate the air conditioner when using a room fumigation Cautions - type insecticide. Failure to observe could cause the chemicals to become Do not use the air conditioner for other purposes. deposited in the unit, which could endanger the health of those In order to avoid any quality deterioration, do not use the unit for who are hypersensitive to chemicals.
PERATION RANGE For systems with cool/heat changeover remote control switch Select operation mode with the cool/heat changeover remote Operation range control switch as follows: Use the system in the following temperature and humidity ranges for safe and effective operation. Cooling operation (figure 4.1) U-5~18MX4 U-4~6ML4 Heating operation (figure 4.2)
6.2. Program dry operation 6.3. Adjusting the air flow direction The function of this program is to decrease the humidity in your Refer to the operation manual of the remote controller. room with minimal temperature decrease (minimal room Movement of the air flow flap (See figure 7) cooling).
6.5. Precautions for group control system or two AINTENANCE remote controller control system This system provides two other control systems beside individual Pay attention to the fan. control (one remote controller controls one indoor unit) system. It is dangerous to inspect the unit while the fan is running. Confirm the following if your unit is of the following control system Be sure to turn off the main switch and to remove the fuses type.
Symptom 3: Fan operation is possible, but cooling and heating do not Symptom 8.2: Indoor unit, outdoor unit work. A continuous low hissing sound is heard when the system is in Immediately after the power is turned on. cooling or defrost operation. The micro computer is getting ready to operate.
Our network of dealers has access to a permanent stock of If the display , the unit number and the operation lamp TEST essential components in order to keep your air conditioner in flash and the malfunction code appears. (See figure 6) operation as long as possible.
11.2. Shortening of "maintenance cycle" and OTES "replacement cycle" needs to be considered in following situations The unit is used in locations where: heat and humidity fluctuate out of the ordinary power fluctuation is high (voltage, frequency, wave distortion, etc.) (The unit cannot be used if power fluctuation is outside the allowable range.) bumps and vibrations are frequent...