Panasonic U-8ME1E8 Installation Instructions Manual page 31

■ Wiring sample
1.
Power Supply
Inter-unit Control Wiring
3.
Clamper *
(Field supply)
Power Supply
* First remove the attached resin fixture.
Then lead the clamper (field supply) through the screw hole
and fix the power supply wire.
Earth
Use this screw when
connecting to ground
for the inter-unit control
wiring.
Earth
Use this screw when
connecting to ground
for the inter-unit control
wiring.
Inter-unit Control Wiring
2.
Inter-unit Control Wiring
Power Supply
4.
Power Supply
Inter-outdoor unit Control Wiring
Clamper **
Inter-unit Control Wiring
(Field supply)
** First remove the attached resin fixture.
Then lead the clamper (field supply) through the screw hole and
square hole from top to bottom or vice versa.
Finally fix each inter-outdoor unit control wire and the inter-unit
control wire separately with the clamper (field supply).
30
Earth
Use this screw when
connecting to ground
for the inter-unit control
wiring.
Earth
Use this screw when
connecting to ground
for the inter-unit control
wiring.
Use this screw when
connecting to ground
for the inter-outdoor
unit control wiring.
Clamper **
(Field supply)