Using A Pictbridge-Enabled Digital Camera To Control Printing Photos; Customizing Photos; Creating And Printing A Scrapbook Or Album Page - Lexmark 7300 Series User Manual

Using a PictBridge-enabled digital camera to control printing photos

Connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print
photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Note: Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information,
see the camera documentation.
3
Follow the instructions in the camera documentation to select and print photos.

Customizing photos

Creating and printing a scrapbook or album page

1
Load paper. For best results, use photo or glossy paper with the glossy or coated side facing down.
2
From the desktop, double-click the Productivity Suite icon.
3
Click Manage Photos.
4
Click Show Folders.
5
From the directory in the right panel, select the folder where your photos are stored.
6
Close the directory in the right panel.
7
From the Productivity Tools section, click Print an album page with various photo sizes.
8
From the "Paper Size" drop-down menu, select a paper size.
9
From the "Page Layout" drop-down menu, select a page layout.
For more options:
a
Click Change the category of layouts listed above.
b
Select a layout for the photos.
c
Click OK.
d
From the "Page Layout" drop-down menu, select a page layout.
64