Using the control panel buttons and menus
Using the control panel
The display shows:
•
All-In-One status
•
Messages
•
Menus
Note: Words on the display may be abbreviated or shortened using ellipses.
Press
1
One-Touch Dial
buttons (1–5)
2
Copy Mode
Scan Mode
3
4
Fax Mode
5
Fax Auto Answer
Redial / Pause
6
7
Phone Book
7
7
6
6
To
Access any of the five programmed Speed Dial numbers.
Access the copy default screen and make copies.
Note: The mode is selected when the button light is on.
Access the scan default screen and scan documents.
Note: The mode is selected when the button light is on.
Access the fax default screen and send faxes.
Note: The mode is selected when the button light is on.
Answer all incoming calls when the button light is on.
Note: For information on setting the number of rings before the machine will answer
incoming calls, see "Receiving a fax automatically" on page 53.
•
In Fax mode, redial the last number entered.
•
Insert a three-second pause in the number to be dialed to wait for an outside line
or get through an automated answering system. Enter a pause only when you
have already begun entering the number.
Access any of the programmed Speed Dial numbers (1–89) or Group Dial numbers
(90-99).
1
1
2
2
3
3
4
4
5
5
20