Using A Pictbridge-Enabled Digital Camera To Control Printing Photos - Lexmark 6300 Series User Manual

Transferring photos using the computer
1
Insert a memory card or flash drive. For more information, see "Inserting a
memory card" on page 40 or "Inserting a flash drive" on page 43.
2
From the Fast Pics dialog, click Save Them On The PC.
3
Select the photos you want to save.
4
Click Next.
5
Follow the instructions on the computer screen to specify where you want to
save the images.
6
Click Save Now.
Using a PictBridge-enabled digital camera to control
printing photos
Connect a PictBridge-enabled digital camera to the printer, and use the buttons on
the camera to select and print photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
•
Make sure the PictBridge-enabled digital camera is set to the correct USB
mode. For more information, see the camera documentation.
•
The printer reads only one media device at a time.
Getting ready to print photos using media devices
46