Connecting Directly To A Telephone Wall Jack; Connecting To A Telephone - Lexmark 7300 Series User Manual

Connecting directly to a telephone wall jack

Connect the printer directly to a telephone wall jack to make copies or send and receive faxes without using a
computer.
1
Make sure you have a telephone cord and a telephone wall jack.
2
Connect one end of the telephone cord into the LINE port
3
Connect the other end of the telephone cord into an active telephone wall jack.
Note: For more information on connecting the printer to telecommunications equipment, see the additional setup
instructions that came with the printer. Setup steps may vary depending on your country.

Connecting to a telephone

Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever
your telephone is located to make copies or send and receive faxes without using a computer.
1
Make sure you have the following:
•
A telephone
•
Two telephone cords
•
A telephone wall jack
2
Connect one telephone cord to the LINE port
of the printer.
of the printer, and then plug it into an active telephone wall jack.
13