Preserving The Print Cartridges; Cleaning The Scanner Glass - Lexmark 7300 Series User Manual

4
Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and
then wipe in the direction shown.
5
With another clean section of the cloth, repeat step 3 and step 4.
6
Let the nozzles and contacts dry completely.
7
Reinsert the print cartridges.
8
Print the document again.
9
If the print quality does not improve, clean the print nozzles. For more information, see "Cleaning the print
cartridge nozzles" on page 72.
10
Repeat step 9 up to two more times.
11
If print quality is still not satisfactory, replace the print cartridges.

Preserving the print cartridges

•
Keep a new cartridge in its packaging until you are ready to install it.
•
Do not remove a cartridge from the printer except to replace, clean, or store it in an airtight container. The
cartridges do not print correctly if left exposed for an extended period of time.
•
Keep the photo cartridge in its own storage unit when not in use.

Cleaning the scanner glass

1
Dampen a clean, lint-free cloth with water.
2
Gently wipe the scanner glass clean.
Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.
73