Replacing A Rear Turn Signal Light Bulb - Yamaha CRYPTON T110C Owner's Manual

1. Turn signal light bulb
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the cowling.
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a rear turn signal
1
light bulb
1. Remove the turn signal lens by re-
moving the screw.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
6-29
EAUS1610
1. Turn signal light bulb
1
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
1
6
[ECA11191]