Replacing A Headlight Bulb - Yamaha CRYPTON T110C Owner's Manual

Replacing a headlight bulb

If a headlight bulb burns out, replace it
as follows.
NOTICE
Take care not to damage the follow-
ing parts:
G Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
1. Remove cowling A. (See page
6-6.)
2. Remove the headlight bulb cover.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU47760
ECA10650
1. Headlight bulb cover
3. Remove the headlight bulb holder
(together with the bulb) by turning
it counterclockwise.
1. Headlight bulb holder
2. Headlight bulb
4. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
5. Place a new bulb into the holder,
1
1. Do not touch the glass part of the bulb.
6. Install the bulb holder (together
1
2
7. Install the headlight bulb cover.
8. Install the cowling.
9. Have a Yamaha dealer adjust the
6-27
push it in, and then turn it clock-
wise until it stops.
1
with the bulb) by turning it clock-
wise.
headlight beam if necessary.
6