Rear Panel Overview - Lexicon RT-10 User Manual

Basic Operation
Front Panel Display Indicators
The numbers in the RT-10 front panel display illustration shown on
page 2-6 correspond to the numbered items that continue below.
27.Channels Indicator
Indicates all audio channels available on the
loaded disc. The table below provides the channel
associated with each letter abbreviation.
Channel Output Connector
L Front Left
C Center
R Front Right
LFE* Subwoofer (Low Frequency Effects)
LS Surround Left
S Subwoofer
RS Surround Right
* LFE information is sent to the Sub analog audio output connector.
28.
Indicates that the RT-10 is receiving a remote control IR
command, even when the RT-10 is using the IR IN connector.
The RT-10 does not receive remote control commands unless
the RT-10 is powered on with the front panel On/Off button.
2-8
(continued from page 2-7)

REAR PANEL OVERVIEW

The RT-10 is manufactured for sale in several different countries.
Each version features a rear panel that includes connectors and
safety instructions appropriate to that particular region.
Note:
The rear panel shown on the next page includes all
possible connectors. However, certain connectors are
not included on some versions. These instances are
noted in the rear panel connector descriptions that
begin below.
1. Region Code Indicator
Indicates the RT-10 region code, which differs from version to
version depending on the region of purchase. All DVD-Vs are
also marked with a region code, which is often located on the
disc packaging. The RT-10 is compatible with discs marked
with this same region code or with the ALL region code. The
RT-10 is not compatible with discs marked with other region
codes.
2. AC Input Connector
Provides power to the RT-10 through the supplied power cord
(2 wire, 10 amp, IEC 320). The supplied power cord features
the appropriate male-end connector for the region of
purchase.
Lexicon