Lexicon RT-10 User Manual page 85

RT-10
To assign a new password:
When a user-defined password is assigned, that password must be
entered before a new password can be assigned. When the current
password is confirmed, the Parental Lock: Password Change screen
opens on the on-screen display.
Note:
If the assigned password is lost or forgotten, factory-
default settings must be restored to delete the
password (5-16). Then, a new password can be
entered.
1. When the Parental Lock: Password Change screen opens, use
the remote control number buttons to enter the new
password.
• When a number is entered, the cursor automatically
advances to the next character space. Press the
return to the previous character space or the
advance to the next character space.
1 2 3
4 5 6 +10
7 8 9 0
2. When the new password has been entered, an ENTER button
appears on the on-screen display to indicate that pressing the
remote control ENTER button will assign the password.
Level
Assigns a user-defined security level, requiring the password before
the RT-10 will activate playback mode when a disc encoded with a
user-defined security level is loaded. The Level control has no effect
when a disc that is not encoded with a security level is loaded.
Select a number within the 1 to 8 range to assign a security level.
The 1 setting represents the highest level of security, and the 8
setting represents the lowest level of security. When a security level
is assigned, the RT-10 requires the user-defined password before
activating playback mode when a disc encoded with a higher
security level is loaded.
arrow to
arrow to
Setup Menus
ENTER
1 to 8, off(country code)
. . . General continues on page 3-46
3-45