Lexicon RT-10 User Manual page 43

RT-10
Setup Navigator Prompts
The table shown at the right lists
all Setup Navigator prompts,
along with their possible settings
and associated Setup menu
parameters.
Note:
Setup Navigator prompts should
be configured while the disc
drawer is empty.
` This setting is recommended
when the RT-10 is connected to
an MC-12 or MC-8 Digital
Controller. When no setting is
indicated, any setting can be
selected.
. . . Setup Navigator continues on page 3-4
Setup Navigator
Prompt
Setup Navigator • Start
OSD Language • English
• français
• Deutsch
TV Type • Widescreen (16:9)
Analog Jacks • 2 Channel
• 5.1 Channel `
• Present `
Center Speaker
• Present `
Surround Speakers
Sub-woofer • Present `
Digital Jack • Dolby Digital
• Dolby Digital/
DTS `
• Dolby Digital/
MPEG
96kHz PCM Audio • No
• Yes `
Exit Setup Navigator • Save Changes
• Delete Changes
Available Settings
• Auto Start Off
• Italiano
• Español
• Standard (4:3)
• Not Connected
• Not Present
• Not Present
• Not Present
• Dolby D/DTS/
MPEG
• PCM
• Not Connected
• Don't Know
• Start Again
Setup Menus
Associated Setup
Menu Parameter(s)
Setup Navigator
(General tab, 3-42)
OSD Language
(Language tab, 3-36)
TV Screen
(Video1 tab, 3-25)
Audio Out
(Audio2 tab, 3-16)
Speaker Setting
(Audio2 tab, 3-18)
Speaker Setting
(Audio2 tab, 3-18)
Speaker Setting
(Audio2 tab, 3-18)
Dolby Digital Out (3-12)
DTS Out (3-13)
MPEG Out (3-14)
(Audio1 tab)
Linear PCM Out
(Audio1 tab, 3-13)
None
3-3