Lexicon RT-10 User Manual page 83

RT-10
Password
Assigns a user-defined password that must be entered before the
RT-10 will activate playback mode when a disc encoded with a
user-defined security level or country code is loaded. A user-defined
password must be assigned before the Level and Country Code
controls can be adjusted. User-defined passwords are automatically
deleted when factory-default settings are restored.
To assign a password:
When the Password parental control is selected for the first time,
the Register Code Number screen shown above opens on the
on-screen display. This screen can be used to assign a user-defined
password.
1. When the Register Code Number screen opens, use the remote
control number buttons to enter the desired password. All
passwords must consist of four numbers between 0 and 9.
• When a number is entered, the cursor automatically
advances to the next character space. Press the
return to the previous character space or the
advance to the next character space.
ENTER
arrow to
arrow to
1 2 3
4 5 6 +10
7 8 9 0
2. When a four-number password has been entered, an
ENTER button appears on the on-screen display to indicate
that pressing the remote control ENTER button will assign
the entered password.
Setup Menus
ENTER
. . . General continues on page 3-44
3-43