Specifications - Lexicon RT-10 User Manual

Appendix

SPECIFICATIONS

Note the following:
• The RT-10 is manufactured for sale in several different
countries. Each version features a rear panel that includes
connectors appropriate to that particular region. These
specifications include all possible connectors. However, certain
connectors are not included on some versions. These instances
are noted in the rear panel connector descriptions that begin
on page 2-8.
• DVD-A and SACD test discs were used to determine audio
specifications. Typical production unit specifications might
differ.
• Specifications are subject to change without notice.
A-2
Audio Output Connectors
Analog • 4 stereo (RCA) pairs for Front L/R (2 pairs), Surround
L/R, Center, and Subwoofer
Digital • 1 AES/EBU (XLR), 1 coaxial (RCA), and 1 optical
(Toslink)
• Sample Rates: 44.1, 48, 88.2, and 96kHz (16 to 24
bits)
• All digital audio output connectors conform to IEC-958
and S/PDIF standards.
Audio Performance
D/A Conversion • 24-bit/192kHz PCM and pure DSD
Frequency Response • 20Hz to 20kHz (±0.5dB), -1.0dB at 50kHz, reference
1kHz (Front L/R)
THD + Noise • 0.004% at 1kHz
Dynamic Range • 100dB
Signal-to-Noise Ratio • 100dB
Channel Separation • 100dB
Output Level • 2.0V maximum
Video Output Connectors
Composite • 2 (RCA)
S-Video • 1
Component • 2 (1 RCA and 1 BNC) and 14-pin D connector
Specifications are subject to change without notice.
Lexicon