Pulley Axle Set Replacement - Matrix U5X-04 BIKE Service Manual

CHAPTeR 9: PART RePlACeMeNT gUiDe

9.17 PUlley Axle SeT RePlACeMeNT

1) Remove the shrouds as outlined in Section 9.11.
2) Remove the drive belt as outlined in Section 9.14.
3) Loosen the nuts holding the generator to the frame (Figure A), and remove the nuts putting tension on the generator belt (Figure B).
figURe A figURe B
4) Once the tension has been removed, walk the generator belt off of the pulley (Figure C).
figURe C
48