1. Manuals
  2. Brands
  3. ACTi Manuals
  4. IP Camera
  5. CAM-5100H
  6. Quick installation manual

ACTi CAM-5100H Quick Installation Manual

Acti cam-5100h 480tvl ip camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
480TVL IP Camera
CAM-5100H
Quick Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for ACTi CAM-5100H

Summary of Contents for ACTi CAM-5100H

  • Page 1 480TVL IP Camera CAM-5100H Quick Installation Guide...

  • Page 2: Getting Started

    Getting Started 1.1 PACKAGE CONTENTS CAM-5100H Warranty Card Software CD Terminal Block for DI/O Power Adaptor Accessory...

  • Page 3: Physical Description

    1.2 PHYSICAL DESCRIPTION 1. DI/O: CAM-5100H supports one alarm input and one alarm output. DI: Logic Level0: 0~0.8V; Logic Level1: 2.31~5.3V DO: Logic Level0: 0~0.5V; Logic Level1: 2.8~3.3V 2. Power LED Indicator 3. Power: 12V 1.5A DC jack input 4. LAN Port: 10/100 Mbps auto sensing, fast Ethernet port for secure Local Network 5.
  • Page 4 RS485 port The IP Camera can control or communicate with external devices via this RS485 port with RJ45 connector Reset button Step 1: Switch off IP camera by disconnecting the power cable Step 2: Using a suitable pointed object, press and continue to hold the Reset Button depressed.
  • Page 5 RJ-45 Connector Pin Assignment for RS-485 RS-485 Cable Pin Assignment RS-485 P8…………….P1...

  • Page 6: Connect Necessary Cables

    The Ethernet cable and power cable are necessary for previewing function.Make sure all cables are correctly and firmly connected. 1. Connect an analog monitor to CAM-5100H Video Out (BNC connector) 2. Connect the power adaptor to CAM-5100H 3. Connect CAM-5100H LAN port to an Ethernet hub (RJ45 connectors)

  • Page 7: Quick Tour

    Quick Tour This section guides you with a quick tour on ACTi CAM-5100H. 2.1 Configure IP Camera 2.1.1 Make sure network environment Default IP of IP camera is 192.168.0.100. Please make sure IP camera and your PC are on the same network segment before running the installation.
  • Page 8 Open Internet Explorer with IP address NOTE: If your web browser is earlier than IE6, then download IE6 is recommended. NOTE: CAM-5100H default IP address is set to 192.168.0.100 2.1.3 Login with default administrator’s account & password NOTE: Default administrator account is set to Admin, password is set to 123456, and click button.

  • Page 9: Preview Video

    2.1.4 Preview Video NOTE: In your Client PC, please make sure the setting of Network Connections Type is set to Auto Negotation, since CAM-5100H follows MII standard. Otherwise, you might not see the live video.
  • Page 10 Connections Type is set to Auto Negotation, since CAM-5100H follows MII standard. Otherwise, you might not see the live video. IMPORTANT: After the IP address is changed, please record this IP address. There is no way to connect to the CAM-5100H if user forgets the new IP address.

  • Page 11: Check Default Video Setting

    2.1.6 Check Default Video Setting NOTE: Please make sure the TV Input (NTSC / PAL) is meet your requirement, and click button. 2.1.7 Click Save Reboot to restore all settings and please wait about 30 seconds for system reboot.

Table of Contents