1. Manuals
  2. Brands
  3. ACTi Manuals
  4. IP Camera
  5. CAM-5120
  6. User manual

ACTi CAM-5120 User Manual

Day & night ip camera acti cam-5120
Hide thumbs Also See for CAM-5120:
Table of Contents

Advertisement

Quick Links

Download this manual
Day & Night IP camera
CAM-5120
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for ACTi CAM-5120

Summary of Contents for ACTi CAM-5120

  • Page 1 Day & Night IP camera CAM-5120 User’s Manual...

  • Page 2: Copyright

    Copyright This manual is the intellectual property of ACTi and is protected by copyright. All rights are reserved. No part of this document maybe reproduced or transmitted for any purpose by any means including electronic or mechanical without the official written permission from ACTi.

  • Page 3: Fcc/Ce Regulation

    typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice. FCC/CE Regulation NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Table Of Contents

    Table of Contents PRECAUTIONS....................0-1 Copyright .............................0-1 Trademarks ..........................0-1 Liability............................0-1 FCC/CE Regulation ........................0-2 INTRODUCTION..................... 1-1 PACKAGE CONTENTS..................1-1 FEATURES AND BENEFITS ................1-2 Safety instructions....................1-4 Minimum system requirements ................. 1-5 PARTs’ NAMES and LOCATIONS ..............1-6 1.5.1 RS-485 Pin Assignment....................1-9 INSTALLATION ....................

  • Page 5: Introduction

    INTRODUCTION 1.1 PACKAGE CONTENTS CAM-5120 Software CD Warranty Card Terminal Blocks for DI/O Power Adaptor Accessory...

  • Page 6: Features And Benefits

    Since the internet’s bandwidth is very critical, the WAN port is equipped with a low latency PPPoE (Point-to-Point over Ethernet) which has excellent transmission speed and enables the CAM-5120 to connect to an ADSL or a cable modem.
  • Page 7 Sophisticate design In addition to adopt the DC and video auto iris, the CAM-5120 also has adjustors including back light compensation, auto white balance, auto gain control and flickerless for different application conditions...

  • Page 8: Safety Instructions

    1.3 Safety instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above.

  • Page 9: Minimum System Requirements

    operating Instructions in this manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment . Other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.

  • Page 10: Parts' Names And Locations

    Power 12V 1.5A DC jack input. LAN port The CAM-5120 connects to the LAN (local area network) via a standard RJ45 connector. Supporting NWAY, this CAM-5120 Day and Night Mpeg-4 IP camera can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
  • Page 11 RS485 port The CAM-5120 Day and Night Mpeg-4 IP camera can control or communicate with external devices via this RS485 port with RJ45 connector. Please refer to the Pin assignment reference 1.5.1. at Page 1-10. Reset button Step 1: Switch off CAM-5120 Day and Night Mpeg-4 IP...
  • Page 12 Auto IRIS Output Auto IRIS Control Video / DC (Switchable) Video DC Level Adjustment Auto Electronic Shutter AES OnL 1/50 (60) sec. ~ 1/100,000 sec; AES Off: 1/50 (60) sec. Back Light Compensation On / Off (Switchable) Flickerless On / Off (Switchable) Automatic Gain Control On / Off (Switchable) Auto White Balance...

  • Page 13: Rs-485 Pin Assignment

    1.5.1 RS-485 Pin Assignment RJ-45 Connector Pin Assignment for RS-485 RS-485 Cable Pin Assignment RS-485 P8…………….P1...

  • Page 14: Installation

    INSTALLATION 2.1 Basic Connections Follow the procedures below to connect the CAM-5120 Day and Night Mpeg-4 IP camera to the respective apparatuses. Please refer to page 1-6 for more details. Connect an analog monitor to CAM-5120 Day and Night Mpeg-4 IP camera video out (BNC connector).

Table of Contents