Related Manuals for ACTi CAM-7300 series
Summary of Contents for ACTi CAM-7300 series
-
Page 1: Quick Installation Guide
IP Outdoor Rugged Dome (with DC 12V / PoE / AC24V) CAM-7300 series Ver. 070307 Quick Installation Guide... -
Page 2: Getting Started
Getting Started PACKAGE CONTENTS CAM-7300 series Power Adaptor (Option) (DC12V / PoE / AC24V) Product CD Terminal Blocks for Power, DI/O & Audio Warranty Card Accessory... -
Page 3: Physical Description
PHYSICAL DESCRIPTION... - Page 5 The IP Camera connects to the LAN (local area network) via a standard RJ45 connector. Supporting NWAY, this IP outdoor rugged dome can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet). The IP Camera connects to the WAN (wide area network) via a standard RJ45 connector.
- Page 6 NAME DESCRIPTION A_Out Audio Output Ground Pin A_In Audio Input Ground Pin Digital Output Ground Pin Digital Input DI: To Trigger Logic Level 0: 0~0.4V; Normal Logic Level 1: 3.3~30V DO: To Trigger Logic Level 0: 0.1~0.6V; Normal Logic Level1: 2.4~5V Conduit Hole These conduit holes are used for cables to go through.
-
Page 7: Installation Procedure
INSTALLATION PROCEDURE There are three types of installation of this IP outdoor rugged dome series. Surface mount Flush mount Wall mount Pictures ● ● Optional Bracket required The mounting procedure can be divided into two parts, 1st: Connect the IP outdoor rugged dome series : Mount the IP outdoor rugged dome series 1.3.1 Connect the IP Outdoor Rugged Dome 1.3.1.1 Remove the cover... - Page 8 1.3.1.3 Connect cables to connectors Please follow the instruction at Chapter 2: Physical Description, for how to connect to each connector. 1.3.1.4 LED Description There are three LEDs in the system. They are indicators for power, fan and heater respectively. According to operating temperature, the different LED will be lighted for different situation.
- Page 9 NOTE: Temperatures indicate here is spec for internal IC temperature, not for operating temperature.
-
Page 10: Mount The Ip Outdoor Fixed Dome (Surface)
1.4 Mount the IP Outdoor Fixed Dome (Surface) -
Page 11: Mount The Ip Outdoor Fixed Dome (Flush)
1.5 Mount the IP Outdoor Fixed Dome (Flush) 0-10... -
Page 12: Mount The Ip Indoor Fixed Dome (Wall)
1.6 Mount the IP Indoor Fixed Dome (Wall) 0-11... -
Page 13: Quick Tour
Quick Tour This section guides you with a quick tour on IP outdoor rugged dome. 2.1 Configure the IP Outdoor Rugged Dome 2.1.1 Make sure network environment Default IP of IP outdoor rugged dome is 192.168.0.100. Please make sure IP outdoor rugged dome and your PC are on the same network segment before running the installation. - Page 14 2.1.2 Open Internal Explorer with IP address NOTE: If your web browser is earlier than IE6, then download IE6 is recommended. NOTE: The IP outdoor rugged dome default IP address is set to 192.168.0.100 2.1.3 Login with default administrator’s account & password NOTE: Default administrator account is set to Admin, password is set to 123456, and click...
- Page 15 2.1.4 Preview the video NOTE: In your Client PC, please makre sure the setting of Network Connections Type is set to Auto Negotation, since IP outdoor rugged dome follows MII standard. Otherwise, you might not see the live image. 1-14...
- Page 16 2.1.5 Set the new IP address *Host Name : Enter in the domain name, Default Host Name is ACTi. *Language : Language setting for Web Configurator after Save Reboot. Default setting is English. *IP Address : The IP address of the LAN interface. The default IP address is 192.168.0.100.
- Page 17 2.1.6 Check Default Video Setting The streaming type [Version 1.0] – without audio function The streaming type [Version 2.0] – with audio function NOTE: Please make sure the TV Input (NTSC / PAL) is meet your requirement , and click button.