Using Diamond; Sleep State - Datalogic DIAMOND D531 Quick Reference

DIAMOND™ D531

USING DIAMOND™

The Datalogic Diamond™ D531 is an omni-directional scanner, which
generates a scan pattern of 16 lines, thus ensuring high performance scanning.
Barcodes are read simply on presentation to the scanner window.
The Diamond™ scanner can be used handsfree as well as hand-held, e.g.:
a) Handsfree scanning by presenting the item to the scanner using a
sweeping curved motion towards the scanner window.
b) You can also use it as a hand-held device by presenting the scanner to the
item using a sweeping curved motion towards the item.

SLEEP STATE

After a default stand-by timeout the scanner enters a "Sleep" state for minimum
power consumption in which the scanner Laser is OFF and the motor is not
rotating.
It is possible to exit this state by simply pressing the trigger.
1