Scanner Data Entry; Warranty - Datalogic DIAMOND D531 Quick Reference

DIAMOND™ D531

SCANNER DATA ENTRY

H = high tone
Beeper
2
one beep
1
LH
1
only the Beeper Intensity command can modify these signals.
2
the data entry good read tone is user-configurable with all the Beeper
commands in the Reading Parameter section.

WARRANTY

Datalogic warranties this product against defects in workmanship and materials,
for a period of 24 months from the date of shipment, provided that the product is
operated under normal and proper conditions.
Datalogic has the faculty to repair or replace the product, these provisions do
not prolong the original warranty term.
The warranty does not apply to any product that has been subject to misuse,
accidental damage, unauthorized repair or tampering.
LED
Green constant
Red constant
Red constant
Red blinking fast
Red blinking slow
Green/Red blinking
alternatively
L = low tone
Meaning
correct read of a code in normal mode.
it remains constant once the decoding
process has
completed and the scanner is in
Timeout between same code readings.
it is constant in normal mode while the
Laser is ON and the scanner is ready
to read a new code (not in Timeout
between same code readings).
No read in single line mode after
Single Line Decoding Duration timeout.
it blinks fast when the scanner is in
Stand-by mode.
it blinks slower when the scanner is in
Sleep mode.
they turn on alternatively during serial
configuration.
been successfully
21