Datalogic DIAMOND D531 Quick Reference page 15

DIAMOND™ D531
Green LED off
BEEP OK
Successive start-ups will automatically recognize the previously loaded drivers.
If external power is used, verify that external power is already supplied.
First Start-Up
Disconnect scanner
at Host
Connect external
power supply to
cable and power up
Reconnect reader
cable to Host and
close dialog box
Connect Diamond™ to
Host
Load drivers
(if required)
Does a dialog
YES
box appear
warning that Bus
power is not
sufficient?
NO
Green LED off - BEEP OK
Select desired USB
interface code
(USB-KBD is default)
Load drivers
(if required)
Read test codes.
Scanner is READY
Green LED blinks
7