1-3-5. Front Case Assembly and IR Sensor Board
4 Front case assembly
1-3-6. Fan (Exhaust) -1
1 Lamp door assembly
(Refer to section 1-3-1, steps 2 to 4.)
Caution :
Because the harness has the shape of flat
cross-section, do not insert the harness into the
harness clamp section with excessive force.
Find out the direction in which the harness can
be inserted easily, and then insert the harness.
Harness
Harness clamp section
VPL-ES5/EX5/EX50/EX5U/EW5
5 Tapping screw
3 Logo
1 Lens cap
2 Four claws
(Refer to section 1-3-4, steps 2 to 11.)
9 Lamp power supply
connector
0 Door detection switch
harness
7 Lamp assembly
(M3 x 7)
J7
6 IR sensor board
2 MB bracket
3 Power board
(Refer to section 1-3-5, steps 1 to 3.)
5 Screw (+P M3 x 6)
4 Front case assembly
8 Screw
(+PWH M3 x 6)
Lamp box assembly
6 Loosen screw.
1-5