Disassembly; Upper Case Assembly - Sony VPL-ES5 Service Manual

1-3. Disassembly

1-3-1. Upper Case Assembly

8 Press here strongly.
9 Remove the Upper case assembly
in the direction of the arrow.
0 Disengage the claws at
the 17 locations respectively.
Upper case assembly
Caution :
Remove the upper case assembly from this corner.
When attaching the upper case assembly, attach it while
aligning with the lower case assembly starting from this corner.
2 Loosen screw.
3 Lamp door assembly
4 Screw
(+P M3 x 6)
B
Front Side
of Unit
1-2
Caution :
If the spacings in the top and bottom are not equal, go to "Assembling
method of optical unit assembly and Focus/Zoom adjust assembly".
(Refer to section 1-3-8. Steps 9 to 14.)
Lower case assembly
Lower case assembly
Front Side
of Unit
Focus adjust gear knob
Upon completion of the upper
case assembly attachment,
check to see that the spacing
in the top is equal to the
spacing in the bottom.
B A
7 Screw
B
(+P M3 x 6)
1 Five screws
A
B
B
A
A
!- Upper case assembly
These portions are fragile.
Be very careful not to
damage them.
6 Remove the filter
door in the direction
of the arrow C.
C
5 Two claws
(+P M3 x 6)
A
A
VPL-ES5/EX5/EX50/EX5U/EW5