1-3-7. Fan (Exhaust) -2
Caution :
When attaching the lamp box assembly, insert the door detection
switch harness into the groove of the lower case assembly.
3 Fan (Exhaust)
*2 80*25 170MM AD0812UB/HB
UB mark is
indicated.
HB mark is
indicated.
Caution :
Two exhaust fans are the two different fans having the difference
characteristics. Be careful not to make mistake in choosing the
desired fan by confirming the indication on the fans.
1-6
4 Remove the door detection switch
harness in the direction of the arrow C.
C
Lower case assembly
Door detection
switch board
1 Two tapping screws
(PAN 3 x 7)
7 Tapping screw
(PAN 3 x 7)
8 Door detection switch board
B
Lamp box assembly
2 Remove the fan harness in the direction of the arrow B.
CN1
5 Remove the protrusion in the
direction of the arrow A.
A
protrusion
6 Lamp box assembly
VPL-ES5/EX5/EX50/EX5U/EW5