1-3-4. Power Board and Thermal Sensor Board
Check to see that the seven connectors are
protruding from the MB bracket.
Be careful that the harnesses must not override on
top of this port or must not be pinched by this portion.
Caution :
When attaching the MB bracket, bind the five harnesses into the shape
of "U" and attaching them to the MB bracket.
Power board
CN701
CN605
1-4
(Refer to section 1-3-3, steps 2 to 6.)
Duct lamp assembly
0 Dowel
Miniature fuse-links (F602)
Power board
CN603
1 Main board
6 Four tapping screws
(PAN 3 x 7)
8 MB bracket
Fuse (H.B.C.)
(F601)
9 Remove the three connectors.
5 Screw
(+PSW M4 x 6)
2 Tapping screw
(PAN 3 x 7)
3 Clamp
4 Sheet
Fan
!- Power board
!= Tapping screw
(PAN 3 x 7)
J1
![ Thermal sensor board
Duct lamp assembly
Duct lamp assembly
7 Remove the fan in the
direction of the arrow.
VPL-ES5/EX5/EX50/EX5U/EW5