Sony VPL-EX4 Operating Instructions Manual
Sony operating instructions data projector vpl-es4, vpl-ex4
Hide thumbs
Also See for VPL-EX4:
- Brochure & specs (4 pages) ,
- Specifications (2 pages) ,
- Quick reference manual (104 pages)
Related Manuals for Sony VPL-EX4
Summary of Contents for Sony VPL-EX4
- Page 1 3-100-203-13 (1) Data Projector Operating Instructions VPL-ES4 VPL-EX4 © 2007 Sony Corporation...
- Page 2 Subpart B of Part 15 of FCC Rules. If you have any questions about this product, you may call: Sony Customer Information Service Center 1-800-222-7669 or http://www.sony.com/ Declaration of Conformity Trade Name: SONY Model: VPL-ES4, VPL-EX4 Responsible Party: Sony Electronics Inc.
- Page 3 If you have questions on the use of the above Power Cord /Appliance Connector /Plug, please consult a qualified service personnel. For the customers in Europe The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC...
-
Page 4: Table Of Contents
Table of Contents Precautions ... 5 Notes on Installation and Usage ... 6 Overview Features ... 8 Location and Function of Controls ... 9 Top/Right Side/Front ... 9 Rear/Bottom ... 9 Control Panel ... 10 Connector Panel ... 11 Remote Commander ... 11 Projecting the Picture Installing the Projector ... -
Page 5: Precautions
Precautions Safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. -
Page 6: Notes On Installation And Usage
Notes on Installation and Usage Unsuitable Installation Do not install the projector in the following situations. Installation is these situations or locations may cause a malfunction or damage to the unit. Poorly ventilated locations • Allow adequate air circulation to prevent internal heat build-up. -
Page 7: Unsuitable Conditions
Very dusty, extremely smoky locations Avoid installing the unit in a very dusty or extremely smoky environment. Otherwise, the air filter will become obstructed, and this may cause a malfunction of the unit or damage it. Dust preventing the air passing through the filter may cause a rise in the internal temperature of the unit. -
Page 8: Features
B Overview Features High brightness, high picture quality High brightness Adopting Sony's unique optical system that provides a high-efficiency optical system. It allows the 165 W lamp to give a light output of 2200 lumen (VPL-ES4)/2100 lumen (VPL-EX4). High picture quality VPL-ES4: Three super-high-aperture 0.63-... -
Page 9: Location And Function Of Controls
Location and Function of Controls Top/Right Side/Front Rear/Bottom a Control panel For details, see “Control Panel” on page 10. b Zoom ring Adjusts the picture size. c Ventilation holes (intake) d Focus ring Adjusts the picture focus. e Security bar An anti-theft chain or wire (commercially available) can be connected to it.Refer to “Dimensions”... -
Page 10: Control Panel
Control Panel a ?/1 (On/Standby) key Turns on the projector when the projector is in standby mode. The ON/ STANDBY indicator around the ?/1 key flashes in green until the projector is ready to operate. Then it lights. b ON/STANDBY indicator (located around the /1 key) Lights up or flashes under the following... -
Page 11: Connector Panel
VOLUME +/– keys on the Remote Commander. For the VPL-EX4, when INPUT A or INPUT B is selected, the sound input to the AUDIO (AUDIO INPUT A/B) connector which is common for INPUT A/B is output. -
Page 12: Reset Key
c KEYSTONE (Trapezoidal distortion correction) key Adjusts the vertical trapezoidal distortion of the image. Pressing this key, the adjustment menu are displayed. Use the arrow keys (v/V/b/B) for adjustment. d RESET key Resets the value of an item to its factory preset value or returns the enlarged image to its original size. -
Page 13: Projecting The Picture
B Projecting the Picture Installing the Projector The distance between the lens and the screen varies depending on the size of the screen. Use the following table as a guide. Screen Distance between the screen and the center of the lens Screen size (inches) Minimum... -
Page 14: Connecting The Projector
INPUT A/B connector for VPL-EX4. • The projector accepts VGA, SVGA, XGA, SXGA, SXGA+, WXGA signals. However, we recommend that you set the output mode of your computer to SVGA (VPL-ES4) or XGA (VPL-EX4) mode for the external monitor. INPU... -
Page 15: Connecting A Vcr
• If you set your computer, such as a notebook computer, to output the signal to both your computer’s display and the external monitor, the picture of the external monitor may not appear properly. Set your computer to output the signal to only the external monitor. For details, refer to the operating instructions supplied with your computer. -
Page 16: Projecting
• For stereo audio connection, connect the stereo audio connecting cable to the AUDIO connector for VPL-ES4, or to the AUDIO INPUT A/B connector for VPL-EX4. • Set the aspect ratio using “Wide Mode” on the INPUT SETTING menu according to the input signal. - Page 17 Press the INPUT key to select the input source. Each time you press the key, the input signal switches as follows: Input-A t INPUT B t Video t S-Video (VPL-EX4 only) To input from Press INPUT to display Computer/Component Input-A...
-
Page 18: Turning Off The Power
Adjust the size of the picture and the focus. Adjust the picture size using the Zoom ring and adjust the picture focus using the Focus ring. Turning Off the Power Turning Off the Power Press the ?/1 key. “POWER OFF? Please press ?/1 key again.”... -
Page 19: Convenient Functions
B Convenient Functions Selecting the Menu Language You can select one of fifteen languages for displaying the menu and other on-screen displays. The factory setting is English. To change the menu language, proceed as follows: ON/STANDBY indicator Front remote control detector Plug the AC power cord into a wall outlet. -
Page 20: Security Lock
Security Lock The projector is equipped with a security lock function. When you turn the power of the projector on, you are required to input the previously set password. If you do not input the correct password, you will not be able to project the picture. -
Page 21: Effective Tools For Your Presentation
Enter the password. Enter the password that was set. Note If you call the customer service center because you have forgotten the password, you will need to be able to verify the projector’s serial number and your identity. (This process may differ in other countries/regions.) Once your identity has been confirmed, we will provide you with the password. - Page 22 v/V/b/B Use the arrow key ( the enlarged image. To return the image to its original size Press the D ZOOM – key. Just pressing the RESET key returns the image back to its original size immediately. To freeze the image projected (Freeze function) Press the FREEZE key.
-
Page 23: Using A Menu
B Adjustments and Settings Using a Menu Using a MENU The projector is equipped with an on-screen menu for making various adjustments and settings. Display items Input signal indicator Input signal setting indicator Picture adjustment menu Input signal indicator Shows the selected input channel. displayed when no signal is input. - Page 24 To clear the menu Press the MENU key. The menu disappears automatically if a key is not pressed for one minute. To reset items that have been adjusted Select the item that you want to reset, and then press the RESET key on the Remote Commander.
-
Page 25: The Picture Setting Menu
The PICTURE SETTING Menu The PICTURE SETTING menu is used for adjusting the picture or volume. Items that can be adjusted or set depend on the kind of input signals. For details, see “Input signals and adjustable/setting items” on page 34. PICTURE SETTING Input A P i c t u r e M o d e... - Page 26 Setting items Functions DDE (Dynamic Selects the mode to play the input video signal Detail according to the material. Enhancer) • Off: Plays back the interlace format without conversion. • Progressive: Plays back the video picture of the interlace format converting to progressive. •...
-
Page 27: The Input Setting Menu
The INPUT SETTING Menu The INPUT SETTING menu is used to adjust the input signal. Items that can be adjusted or set depend on the kind of input signals. For details, see “Input signals and adjustable/setting items” on page 34. When the video signal is input Setting items Functions... -
Page 28: About The Preset Memory No
Setting items Functions Shift Adjusts the position of the picture. H adjusts the horizontal position of the picture.V adjusts the vertical position of the picture. As the setting for H increases, the picture moves to the right, and as the setting decreases, the picture moves to the left. -
Page 29: The Set Setting Menu
Remote Commander. Auto Input Search When set to “On,” the projector detects input signals in the following order: Input-A/Input-B (VPL-EX4 only)/ Video/S-Video. It indicates the input channel when the power is turned on or the INPUT key is pressed. - Page 30 Setting items Functions Power Saving Selects the Power Saving mode. • Lamp off: The lamp goes off if no signal is input for 10 minutes. The lamp lights again when a signal is input or any key is pressed. • Standby: The projector goes into Standby mode if no signal is input for 10 minutes.
-
Page 31: The Menu Setting Menu
The MENU SETTING Menu The MENU SETTING menu is used for changing the menu displays. Setting items Functions Status (on-screen Sets up the on-screen display. display) When set to “Off,” turns off the on-screen displays except for the menus, a message when the power is turned off, and warning messages. -
Page 32: The Install Setting Menu
The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the settings of the projector. INSTALL SETTING V Key s t o n e : I m ag e F l i p : O f f B a ck g ro u n d : B l u e L a m p M o d e : S t a n d a rd... -
Page 33: The Information Menu
The INFORMATION Menu The INFORMATION menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp. INFORMATION I n p u t A V P L - E S 4 Serial No. - Page 34 Component Video GBR – – – – – – – Computer B&W – – – – – – – – Computer B&W – – – – – – – (Lower than VGA for VPL- Lower than SVGA for VPL-EX4) –...
-
Page 35: Replacing The Lamp
B Maintenance Replacing the Lamp The lamp used as a light source is consumable product. Thus replace the lamp with a new one in the following cases. • When the lamp has burnt out or dims • “Please replace the Lamp.” appears on the screen •... - Page 36 Insert the new lamp all the way in until it is securely in place (a). Tighten the two screws (b). Fold down the handle to replace it (c). Notes • Be careful not to touch the glass surface of the lamp. •...
-
Page 37: Cleaning The Air Filter
Cleaning the Air Filter The air filter should be cleaned every 500 hours. Remove dust from the outside of the ventilation holes with a vacuum cleaner. 500 hours are approximate. This value varies depending on the environment or how the projector is used. -
Page 38: Troubleshooting
B Others Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom The power is not turned on. • The power has been turned off and on with the ?/1 key at a short... - Page 39 Input a signal that is within the range of the frequency. • The resolution setting of the output signal of the computer is too high. c Set the output setting to SVGA (VPL-ES4) or XGA (VPL-EX4) The picture flickers. “Dot Phase” on the INPUT SETTING menu has not been adjusted properly.
-
Page 40: Messages List
Ensure that “High Altitude Mode” in the Setup menu is set to “On.” The fan is broken. c Consult with qualified Sony personnel. Unplug the AC power cord from the wall outlet after the ON/ STANDBY indicator goes out, plug the power cord to the wall outlet, and then turn the projector on again. - Page 41 Caution Messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning and Remedy Not applicable! You have pressed the wrong key. c Press the appropriate key. The panel keys are locked! “Panel Key Lock” on the SET SETTING menu is set to “On.” c All the keys on the control panel of the projector are locked.
-
Page 42: Specifications
2,360,000 pixels (786,432 pixels × 3) Lens 1.2 times zoom lens VPL-ES4: f 18.8 to 22.6 mm/F1.6 to 1.94 VPL-EX4: f 18.9 to 22.7 mm/F1.6 to 1.90 Lamp 165 W Ultra high pressure lamp Projected picture size 40 to 300 inches (measured... -
Page 43: Optional Accessories
Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE... - Page 44 Pin assignment INPUT A connector (HD D-sub 15-pin, female) R/R-Y B/B-Y GND (R) GND (G) GND (B) INPUT B connector (HD D-sub 15-pin, female) (VPL-EX4 only) GND (R) GND (G) GND (B) RS-232C connector (D-sub 9 pin, female) RXDA TXDA Specifications...
- Page 45 Preset signals Memory Preset signal Video 60 Hz 60 Hz Video 50 Hz 50 Hz 480/60i 480/60i 575/50i 575/50i 480/60p 480/60p (Progressive component 575/50p 575/50p (Progressive component 1080/60i 1035/60i, 1080/60i 1080/50i 1080/50i 720/60p 720/60p 720/50p 720/50p 640 × 350 VGA mode 1 VGA VESA 85 Hz 640 ×...
- Page 46 Memory Preset signal 1280 × 960 1280 × 1024 1400 × 1050 1280 × 768 1280 × 720 Notes • When a signal other than the preset signals shown above is input, the picture may not be displayed properly. • When an SXGA+ signal is input, the image may extend beyond the edges of the screen. In this case, input a signal with no black edges around the image, and disconnect and reconnect the cable or select the input signal by pressing the INPUT key.
-
Page 47: Installation Diagram
(free) Distance between the front of the cabinet and the center of the lens Front of the Front of the lens cabinet 28.7 (1 10.0 ( Center of the lens Floor ) (VPL-ES4)/ ) (VPL-EX4) Unit: mm (inches) Installation Diagram... -
Page 48: (The Above-Mentioned Numerical Values Differ From The Design Values Because The Values In The Table Include A Tolerance.) A'(N) = {(Ss × 18.56/0.6299) - 24.0} × 1.03+27.3
(N) = {(SS × 18.56/0.6299) – 24.0} × 1.03 a (M) = {(SS × 22.61/0.6299) – 24.0} × 0.97 b = x–(SS/0.6299 × 3.2) c = x–(SS/0.6299 × 3.2 + 67.6) VPL-EX4 1190 1800 2410 M 1360... -
Page 49: Ceiling Installation (Front Projection)
When installing the projector on the ceiling, use a Projector Suspension Support recommended by Sony. For ceiling installation, ask for qualified Sony personnel. See the chart on page 50 concerning the installation measurements. The alphabetical letters in the illustrations indicate the distances below. - Page 50 (The above-mentioned numerical values differ from the design values because the values in the table include a tolerance.) a’(N) = {(SS × 18.56/0.6299) a’(M) = {(SS × 22.61/0.6299) X = b + (SS/0.6299 × 3.2 + 57.0) VPL-EX4 a’ N 1230 1840 2450...
-
Page 51: Dimensions
Dimensions Front Center of the lens Side 308 (12 83 (3 Center of the projector 267 (10 93.4 Cross section of Security bar part Unit: mm (inches) Dimensions... -
Page 52: Unit: Mm (Inches)
308 (12 Unit: mm (inches) Dimensions... -
Page 53: Index
Index Adjust Picture ...25 Adjust Signal ...27 Air filter ...37 Auto Input Search ...29 Background ...32 Batteries ...12 Brightness ...25 Color ...25 Color System ...29 Color Temp..25 Connecting a computer ...14 Connecting a VCR ...15 Contrast ...25 DDE ...26 Digital Zoom function ...21 Dot Phase ...27 fH (Horizontal Frequency) ...33... - Page 54 RS-232C connector ... 44 Scan Converter ... 28 Screen size ... 13, 42 Security bar ... 9, 51 Security Lock ... 20, 32 Security lock ... 9 Sharpness ... 25 Shift ... 28 Smart APA ... 29 Specifications ... 42 Start Up Image ...
- Page 55 Sony Corporation...