Lamp Power Supply - Sony VPL-ES5 Service Manual

1-3-9. Lamp Power Supply

2 Fan (Exhaust)
*2 80*25 170MM AD0812UB/HB
(Refer to section 1-3-6, steps 5 to 10) and
(refer to section 1-3-7, steps 1 to 6.)
7 Two harnesses
Lamp power supply
Caution :
When re-assembling the machine,
route the respective harnesses and
wires at the specified locations as shown.
D
Route the harness D
between them.
Lamp power supply
B
C
1-8
1 Lamp box assembly
6 Two tapping screws
(PAN 3 x 7)
A
P1
C
!- Door detection
switch board
A
Route the harness A
underneath this sheet.
Door detection switch board
5 Optical unit assembly
(Refer to section 1-3-8, steps 2 to 8.)
B
D
9 Lamp power supply
CN1
8 Remove the lamp power supply
3 Duct lamp assembly
4 Focus/Zoom adjust
assembly
0 Claw
Door detection
switch board
E
in the direction of the arrow E.
VPL-ES5/EX5/EX50/EX5U/EW5