Front Case Assembly And Ir Sensor Board; Fan (Exhaust) -1 - Sony VPL-ES7 Service Manual

1-3-5. Front Case Assembly and IR Sensor Board

7 Front case assembly

1-3-6. Fan (Exhaust) -1

1 Lamp door
(Refer to section 1-3-1, steps 2 to 4.)
Caution :
Because the harness has the shape of flat
cross-section, do not insert the harness into the
harness clamp section with excessive force.
Find out the direction in which the harness can
be inserted easily, and then insert the harness.
Harness
Harness clamp section
VPL-ES7/EX7/EX70
3 Tapping screw
6 Logo
1 Lens cap
2 Four claws
(Refer to section 1-3-4, steps 2 to 8.)
8 Lamp connector
assembly
9 Door detection switch
harness
6 Lamp assembly
(PAN M3 x 7)
J7
5 IR sensor board
4 Sheet
2 MB bracket 4 Front case assembly
3 Power board
(Refer to section 1-3-5, steps 1 to 4.)
7 Screw
(+PWH 3 x 6)
5 Loosen two screws.
Lamp box assembly
1-5