1-6-7. DC Fan (For Lamp Exhaust) and TL Board
6 Four screws
(BVTP3
2 Relay connector
4 Remove the harness
from the two hooks
To the C board
8 Two hooks
!- Fan 4
Attach the fan 4 so that
the label side faces as
shown in the illustration.
Label side
0 Lamp house bottom
VPL-FH60
1 Relay connector
3 Remove the harness
12)
from the two hooks.
To the C board
!= Fan 5
Label side
9 Lamp house top
7 Screw
(BVTP3
12)
To the C board
5 Harness
!\ TL board
!] Cover (TL)
!; Fuse connector
assembly
![ Screw
(BVTP3
12)
1-17 (E)