Panasonic KX-TDA100 Getting Started page 23

Assigning the Incoming Trunk Call Destination
Click "Tool" → "BRI Automatic Configuration"
2.
from the menu bar.
3. a.
Click "Check" to turn on the BRI card.
b.
Click [OK].
4. a.
Enter the Subscriber Number for the desired
ports.
b.
Click [Execute].
ISDN line data such as P-P/P-MP, TEI Mode
are automatically set.
c.
Click "Check Box" of the desired ports.
d.
Click [Data Apply].
a.
5.
Double-click "Slot".
b.
Change the status of the BRI card to INS.
c.
Click [OK].
For analogue trunk user (DIL Setting):
1.
Double-click "CO & Incoming Call".
2.
Double-click "DIL Table & Port Setting".
3.
Click the "DIL" tab.
4.
For necessary items, enter the proper numbers and
selections.
5.
Click [OK].
4.3 Programming the Hybrid IP-PBX
Getting Started 23