Connecting The Pc; Installing The Kx-Tda Maintenance Console - Panasonic KX-TDA100 Getting Started

4.1 Connecting the PC

4.1 Connecting the PC
KX-TDA Maintenance Console serves as an overall system programming tool for the Hybrid IP-PBX.
KX-TDA Maintenance Console's Quick Setup lets you easily configure the Hybrid IP-PBX to receive
intercom and trunk calls, as well as apply basic settings such as time and date.
Note
The contents and design of the software are subject to change without notice.
To programme the Hybrid IP-PBX, connect it to the PC with serial interface.
Serial Interface Connection
To USB Port
PC
To COM Port
PC
4.2

Installing the KX-TDA Maintenance Console

For the system requirements of the PC (e.g., operating system, hardware specifications), refer to
"3.3.1 Installing and Starting the KX-TDA Maintenance Console" in the Installation Manual.
Notes
• Make sure to install and use the latest version of the KX-TDA Maintenance Console.
• To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed.
Follow the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-
PBX is first connected to the PC via USB, you may be asked to select the appropriate USB
driver. Browse for and select the KX-TDA USB driver that was installed previously.
• Screen shots reprinted with permission from Microsoft Corporation.
20 Getting Started
USB Port
RS-232C Port
1. Copy the setup file of the KX-TDA Maintenance
Console to your PC. (Its icon is shown here, on the
left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the
installation wizard.
RS-232C (Cross Cable)
Pin Assignments
COM Port RS-232C Port
Pin No.
Pin No.
2
3
4
5
6
7
8
2
3
4
5
6
7
8